LPG weed burner torch

Weed torch or weed burner kit is widely used in daily life like barbecue、heating、weed killing、roofing repairing etc. Weed burner assembled with the high-pressure adjustable regulator, usually 1.5 meter pressure hose and the control handle. Multi options for the different diameter burner head and different length of gas pipe. To complete the burner before using, screw the loose nut on the end of the extension pipe to the male thread . Tighten with a spanner. Screw the fittings on the adjustable regulator onto your LPG cylinder and spanner tighten. The unit is now ready to operate.

Open LPG cylinder valve, holding the control handle, lightly open the gas flow with the black screw knob . Light the burner with your match or some models including a piezo ignitor, it will begin with as a soft and small flame. After that adjust the flame for operation. Adjust the gas control knob to give the gas flow required. You can give a fast gas flow rate though depressing lever. The intensity of heat you can adjust by the high-pressure adjustable regulator by loosening the lock nut under the control knob, adjusting and then lock the nut again.

Before finish job, just turn off the gas valve at the cylinder, empty the burner and hose of gas and then close the trigger. This helps to maintain weed burner life.